Jetting for Yamaha KT100 Kart

This app provides, for the present weather situations and a given engine configuration (engine model, gasoline, and so on.), a jetting advice for Yamaha KT100 engines to get one of the best performance.

In order to get the climate values, the application can use the GPS to obtain the place and altitude, and the community connection to get the temperature, pressure and humidity from the closest climate station. Nevertheless, the appliance can run without GPS and internet connection, in this case, the person has to enter the weather data.

The utility is made up of 4 tabs which may be described subsequent.

- Results: In this tab, a beneficial jetting setup is proven. These information are calculated relying on the climate circumstances and the engine and monitor configuration given in the following tabs. The following values are given: high needle, low needle, pop-off pressure and fulcrum arm height. Besides this jetting data, the air density and density altitude are proven too. In addition, this tab lets do a fine tuning adjustment for the high and low needles to adapt to your concrete motor and carburetor.

- Weather: you'll have the ability to set the values for present temperature, strain, altitude and humidity. The values of this display screen could be manually set or could be loaded by the applying studying the information from the nearest public climate station (from the GPS tab).

- Engine: you can set in this screen the details about your engine, carburator and observe, that is, the engine sort (Tuned Pipe / long pipe, 4-hole and 3-hole can, junior with standard WB3A carburator or junior with smaller WA55 carb), the oil mix ratio and the sort of the circuit (sprint or enduro, brief or long tracks). Depending of the monitor sort, the carburetion setups might be tailored.

- GPS: This tab allows to make use of the GPS to get the current place and altitude, and hook up with an exterior service to get the weather conditions of the closest weather station (temperature, strain and humidity).

The software works with totally different measure models: inHg, mb, mmHg, hPa, atm for stress, ºC and ºF for temperature.

If you click in More from developer you'll find the opposite karting instruments from ISEnet:

- Kart Chassis Setup, that helps you set up your chassis easily, for all brands: CRG, Tony Kart, Maranello, Birel, Intrepid, Energy, etc.

- Other carburation apps for go karts:

Rotax Max EVO and non-EVO.

IAME X30 Leopard

TM KZ / ICC / Shifter (K9, K9B, K9C, KZ10, KZ10B).

Honda CR125 powered shifter go-kart.

Modena KK1 KK1R

IAME Shifter, Screamer SuperShifter

- Air Density Meter: should you don't discover a specific jotting app in your engine, you can use this app to create jeting charts.

- Apps for MX bikes (KTM, Honda CR CRF, Yamaha YZ, Suzuki RM, Kawasaki KX).

We're working in new carburetion apps for different kart motors (LKE, Maxter, TKM, Vortex, WTP, etc.) and a new tech apps for Alfano / Mychron visualization. Please ship us and e-mail if you want to be notified when these instruments are published.

ERRORS AND SUGGESTIONS:

Please perceive that due to the number of telephones, android variations, operators, etc. it's extremely hard to develop bug-free applications. If you discover any bug, please, send us an e-mail to [email protected] explaining, as detailed as you'll find a way to, the error that you have got detected. We'll attempt to repair it or give an answer as quickly as possible.

PERMISSIONS:

The utility wants the next permissions:

- Your location: it lets the appliance get the position and the altitude using the GPS to know which is the closest weather station.

- Storage: it's used for storing the config preferences.

- Network communication: it is used for invoke the external service which provides the present weather conditions

- Phone calls (read cellphone state and identity): it permits to get the system identifier to find a way to validate the license standing of the put in software.